503E-3-S Busbar Copper Punching Bending Machine.Main function:  To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/  vertical bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect.  Function introduction:  ●● 1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat,  no burr, no waste.  ●● 2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly  whole one,improving concentric degree of moulds,  ●● prolonging the service life of the moulds,saving time of change.  ●● 3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal  bending and embossing. Also prolonging the service life.  ●● 4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same  time while working without impact each other.  ●● 5. Adopting PLC controlled, bending angle can be cnc,and with a storage function.  ●● 6. Three units of the machine can work at the same time,not affecting each other,Improving the processing  efficiency.  ●● 7. Hydraulic tank with thick plate weldin g,and is treated by phosphating, making hydraulic oil can be long time  used and will not degenerate.  The Paramter:ItemModelDGWMX503E-3-SDGWMX503E-3Max. Punching Force (KN)500500Punching Diameter Range (MM)Φ4.3-32Φ4.3-32Max. Process Thickness (MM)16×20016×200Max. Vertical Bending Width (MM)120120Work Bench Size(MM)1600×1400/1020×5001600×1400/1020×500Size Of The Machine (MM)1920×1550×15001920×1550×1465Weight Of The Machine(KG)1650KG1650KGBending Angle CncYESNOThe Three Units Work At The Same TimeYESYES503E-3-S Busbar Copper Punching Bending Machine Videos